Instructions for replacing the Finger Dinger mount

Required Parts

Finger Dinger repair kit

1. Replacement mount

2. Strap

3. Hex key

4. Nut

5. Grease

6. Cotton bud

Preparation: Remove the broken mount from the bell using the hex key provided

1. Attach the strap to the mount, ensuring it is in the correct position

2. Apply a small amount of grease to the rubber grommet

3. Fully tighten the screw and then unscrew 6.5 turns

4. Fit the bell to the mount in the correct position, be sure not to overtighten (ensure the nut is fully inserted before tightening)

5. Finally secure the strap in place